Photoelectrochemistry & Photovoltaic

Lightsource LS 1550
-Dom. wavelength: 1550 nm
-Typ. intensity: 40 W/m²
-Max. input current: 800 mA

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

Lightsource LS 1450
-Dom. wavelength: 1450 nm
-Max. input current: 800 mA

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

Lightsource LS 1300
-Dom. wavelength: 1300 nm
-Typ. intensity: 60 W/m²
-Max. input current: 800 mA

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

Lightsource LS 1200
-Dom. wavelength: 1200 nm
-Max. input current: 1200 mA

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

Lightsource LS 275
-Dom. wavelength: 275 nm
-Typ. intensity: 40 W/m²
-Max. input current: 1300 mA

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

Light Exclusion Box / Faradays Cage
-Fitting for CIMPS optical rail
-For all CIMPS light sources incl. TLS03 (not for Solar Simulators)
-Easy handling by hinged top/sides and three cable inlets
-Ground connector for shielding (Faradays Cage function)
-Dimensions: 60 x 33 x 23 cm (W x D x H) without handle

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

CIMPS Add-on for Photo-Electrochemical Light Emission
-SEL033 NIST traceable sensor
-CIMPS-emit software for integral measurements

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

Zennium/X/pro to CIMPS/X/pro
-EPC42 extension card for controlling PP212
-LED potentiostat: PP212
-Current range: ± 10 A
-Voltage range: ± 20 V
-Frequency range: DC - 200 kHz
-LDA2 Light source setup
-Optical bench
-Calibrated feedback sensor
-LSW-1 plug-in LED
-CIMPS aligner bar
-ThalesXT software package
-SIMPECC, CIMPS cable set, calibration data

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

CIMPS add-on for dynamic transmittance/reflectance measurements
-PAD4 card for parallel acquisition of up to 4 sensors
-4 calibrated sensor: 1x UV, 1x NIR, 2xVIS with filter catalogue
-White light source
-CIMPS-dtr/ois software

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

CIMPS Add-on for Photo-Electrochemical Light Emission
-SEL033 NIST traceable sensor
-ILT-960 spectrometer
-Integral & spectrally resolved measurements
-CIMPS-emit software for integral and spectral resolved measurements

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

CIMPS Add-on for Photo-Electrochemical Transmittance/Absorbance
-ILT-960 spectrometer
-PECC-slide with 2 x PECC-2
-LSW-1 LED (420-730 nm) or WOW01 tungsten light source (360-1000 nm)
-CIMPS-abs software

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

CIMPS Add-on for QE/IPCE/PCS Measurements
TLS03
-Wavelength range: 365-1020 nm
-Typ. res.: 1 nm@430-720 nm, 15 nm@365-420 nm, 40 nm@735-1020 nm
-Typ. line width: 10 nm@365-720 nm, 50 nm@735-1020 nm
-Calibration for 1 mm distance
-Calibration for PECC-1/2 required, optional
-CIMPS-QE/IPCE software

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

CIMPS Add-on for Photo-Electrochemical Transmittance/Absorbance
-Backthinned-CCD fiber optic spectrometer
-PECC-slide with 2 x PECC-2 Q
-Balanced tungsten-deuterium light source (220-1100 nm)
-CIMPS-abs software

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

CIMPS Add-on for QE/IPCE/PCS Measurements
TLS03/UV
-Wavelength range: 295-1020 nm
-Typ. res.: 1 nm@430-720 nm, 15 nm@295-420 nm, 40 nm@735-1020 nm
-Typ. line width: 10 nm@295-720 nm, 50 nm@735-1020 nm
-Calibration for 1 mm distance
-Calibration for PECC-1/2 required, optional
-CIMPS-QE/IPCE software

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

Zahner's CIMPS is a highly dynamic LED-based system with an active light feedback loop that ensures a controlled and constant light intensity during the photoelectrochemical or photovoltaic measurements. Fast light sources enable dynamic photoelectrochemical measurements like IMPS/IMVS. The robust control of light intensity allows accurate IMPS/IMVS measurements, giving the system its iconic name ""controlled intensity-modulated photo spectroscopy (CIMPS)"". Further information on our light feedback loop and its benefits is provided in the manuscript ""C in CIMPS"".

CIMPS-pro Photo-Electrochemical Workstation
-Zennium pro workstation
-Frequency range: 10 µHz to 8 MHz
-Max. current: ± 3 A
-Controlled voltage: ± 15 V / ± 5 V
-Compliance voltage: ± 28 V
-HDP technology for outstanding dynamic accuracy
-ADF technology for high-precision high-speed CV (option)
-Floating & grounded mode switchable
-5 slots for additional hardware modules
-EPC42 extension card for controlling PP212
-LED potentiostat: PP212
-Current range: ± 10 A
-Voltage range: ± 20 V
-Frequency range: DC - 200 kHz
-LDA2 Light source setup
-Optical bench
-Calibrated feedback sensor
-LSW-1 plug-in LED
-CIMPS aligner bar
-ThalesXT software package
-TestBox, SIMPECC, CIMPS cable set, calibration data
-System is controlled by a Windows8/10-PC (not included)

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

CIMPS-X Photo-Electrochemical Workstation
-Zennium X workstation
-Frequency range: 10 µHz to 12 MHz
-Max. current: ± 4 A
-Controlled voltage: ± 15 V / ± 5 V
-Compliance voltage: ± 32 V
-HDP technology for outstanding dynamic accuracy
-ADF technology for high-precision high-speed CV
-Floating & grounded mode switchable
-10 slots for additional hardware modules
-EPC42 extension card for controlling PP212
-LED potentiostat: PP212
-Current range: ± 10 A
-Voltage range: ± 20 V
-Frequency range: DC - 200 kHz
-LDA2 Light source setup
-Optical bench
-Calibrated feedback sensor
-LSW-1 plug-in LED
-CIMPS aligner bar
-ThalesXT software package
-TestBox, SIMPECC, CIMPS cable set, calibration data
-System is controlled by a Windows8/10-PC (not included)

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

CIMPS-QE/IPCE is an extended CIMPS system with the capability to measure quantum efficiency (QE) or incident photon to current efficiency (IPCE). The CIMPS-QE/IPCE extension consists of an easily mountable and portable tuneable light source (TLS). The TLS contains dynamic LEDs, a monochromator and a feedback control which allow accurate light illumination during the measurements without any warm up time.

Multiple LEDs in the TLS provide higher light intensity across the broad wavelength range and longer operational lifetime as compared to any traditional Xe-lamp. This high light intensity is crucial for IPCE measurements on DSSC, perovskites or organic solar cells or photoelectrodes.

Like the modular LEDs used in the CIMPS system, the TLS is also able to carry out sine-wave modulation for IPCE measurements and does not require a mechanical chopper. During IPCE measurements, a special indicator is also provided which indicates if the measurement parameters are optimum for IPCE measurement or not. Further information about IPCE measurement is provided in our application note CIMPS-IPCE.

Fully Integrated QE/IPCE Photo-Electrochemical Workstation
-Zennium pro workstation
-Frequency range: 10 µHz to 8 MHz
-Max. current: ± 3 A
-Controlled voltage: ± 15 V / ± 5 V
-Compliance voltage: ± 28 V
-HDP technology for outstanding dynamic accuracy
-ADF technology for high-precision/ high-speed CV (option)
-Floating & grounded mode switchable
-5 slots for additional hardware modules
-EPC42 extension card for controlling PP212
-LED potentiostat: PP212
-Current range: ± 10 A
-Voltage range: ± 20 V
-Frequency range: DC - 200 kHz
-LDA2 Light source setup
-Optical bench
-Calibrated feedback sensor
-LSW-1 plug-in LED
-CIMPS aligner bar
-Tunable light source TLS03
-Wavelength range: 365-1020 nm
-typ. res.: 1 nm@430-720 nm, 15 nm@365-420 nm, 40 nm@735-1020 nm
-typ. line width: 10 nm@365-720 nm, 50 nm@735-1020 nm
-Calibration for 1 mm distance
-Calibration for PECC-2 required, optional
-ThalesXT software package
-TestBox, SIMPECC, CIMPS cable set, calibration data
-System is controlled by a Windows8/10-PC (not included)

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing

CIMPS-QE/IPCE is an extended CIMPS system with the capability to measure quantum efficiency (QE) or incident photon to current efficiency (IPCE). The CIMPS-QE/IPCE extension consists of an easily mountable and portable tuneable light source (TLS). The TLS contains dynamic LEDs, a monochromator and a feedback control which allow accurate light illumination during the measurements without any warm up time.

Multiple LEDs in the TLS provide higher light intensity across the broad wavelength range and longer operational lifetime as compared to any traditional Xe-lamp. This high light intensity is crucial for IPCE measurements on DSSC, perovskites or organic solar cells or photoelectrodes.

Like the modular LEDs used in the CIMPS system, the TLS is also able to carry out sine-wave modulation for IPCE measurements and does not require a mechanical chopper. During IPCE measurements, a special indicator is also provided which indicates if the measurement parameters are optimum for IPCE measurement or not. Further information about IPCE measurement is provided in our application note CIMPS-IPCE.

Fully Integrated QE/IPCE Photo-Electrochemical Workstation with UV
Extension
-Zennium pro workstation
-Frequency range: 10 µHz to 8 MHz
-Max. current: ± 3 A
-Controlled voltage: ± 15 V / ± 5 V
-Compliance voltage: ± 28 V
-HDP technology for outstanding dynamic accuracy
-ADF technology for high-precision/high-speed CV (option)
-Floating & grounded mode switchable
-5 slots for additional hardware modules
-EPC42 extension card for controlling PP212
-LED potentiostat: PP212
-Current range: ± 10 A
-Voltage range: ± 20 V
-Frequency range: DC - 200 kHz
-LDA2 Light source setup
-Optical bench
-Calibrated feedback sensor
-LSW-1 plug-in LED
-CIMPS aligner bar
-Tunable light source TLS03 UV
-Wavelength range: 295-1020 nm
-typ. res.: 1 nm@430-720 nm, 15 nm@295-420 nm, 40 nm@735-1020 nm
-typ. line width: 10 nm@295-720 nm, 50 nm@735-1020 nm
-Calibration for 1 mm distance
-Calibration for PECC-2 q required, optional
-ThalesXT software package
-TestBox, SIMPECC, CIMPS cable set, calibration data
-System is controlled by a Windows8/10-PC (not included)

For pricing information, please request a quotation from sales@sciencetech-inc.com.

Contact for Pricing